Thin Material Corrugated Roof Sheet Forming Machine

Thin Material Corrugated Roof Sheet Roll Forming Machine

Produce Thin Material: Normal machine use material thickness 0.3-0.6mm,but many Africa countries use 0.12-0.3mm thickness material ,because the cost is lower.

Cost-Effective:Usually people use barrel corrugated sheet making machineto make this thin material ,but this machine can only use plate material ,so it will need a cut to length machine to cooperate with it ,

so this will be a huge cost ,but our machine can use coil material,very cost -effective.

Profile drawing for reference:

Corrugated roofing sheet has many different shapes,usually different countries have its own popular design ,we can customize the machine as customers’ demand.

Processing Flow

Uncoiling → Feeding material into machine →Roll forming → Auto cutting →Products receiving table

Manual Decolier 

Capacity:5 tons

Coil inner diameter:450-550mm

Feeding width: max 1220mm

Structure: welded by the steel plates and profiled bar.

The shrink and expand of core is manually, with manual brake,The coil moving forward or reverse is pulled by roll forming machine

Feeding Device

1.Hand wheels on both sides can be used to adjust the feeding width.

2.Four stainless rollers can make the material go into the machine smoothly and prevent the scratch on the material surface.

3.There are three rows of orange plastic rollers can make the steel coil go into the machine smoothly.  

Roll Forming And Transmission Device

1.rollers thick chromed good hardness for long service time.

2. Each roller has number and with keynotes, it can fix on the shaft stablely

3.gear and double chain,stable

Hydraulic Cutting Device

We use four pillars cutting system structure, it can make sure the cutting stable

PLC control system

PLC brand:Delta

● Encoder brand:Omron with accurate counting measurement and good quality

● Electrical components:Schneider

●Operating language:English and Chinese(or as requested)

Touch screen and manual buttons:control the movement of the machine and the length of the sheet.

our manual buttons are silver, which has good conductivity, accuracy and long service life.

Each wire marked with a number or letter is installed neatly.

The aviation plug used to integrated these wires together is inside a box to protect it.And it is convenient for your use. 

You can choose to install remote operating system of PLC. So that our engineers will debug it for you remotely when there is a problem with the machine.

Hydraulic station

● Hydraulic station motor:5.5KW

● Hydraulic oil:46# hydraulic oil

● Main components:Include a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And one of electromagnetism valve

Updated on January 23, 2024

Raw Material:PPGI,PPGL

Material thickness: （0.12-0.3 mm)

Machine Frame:350mm H beam structure, with 18mm welded steel middle support plate.

Material Of Rollers:High grade 45# forged steel,Chromed treatment

Forming Stations:Roller stations :21 rows

Diameter Of Shafts:Φ80mm Solid

Material Of Shafts:High Grade 45#,With Heat Treatment

Forming Speed:15 M/Min

Voltage:380v/50hz/3p (As Requested)

Transmission Way:By 1 Inch Chain (Double Chains)

Main Motor:5.5 KW

Cutting Blade Material:Gcr12 quenched treatment

Cutting Type:hydraulic post cutting

Driving Method:By pillar type Cylinder